To Next PageTo Next Page
How to fix a Fujitsu FI-5015C Scanner that does not turn on?
If your Fujitsu Scanner doesn't turn on, try the following: * Ensure the main switch is turned on. * Press the power button. * Verify that the AC cable and adapter are correctly connected. Try disconnecting and reconnecting them. * If using Windows, try pushing the power button again after Windows has completely started.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning does not start on your Fujitsu Scanner, ensure that: * The document is correctly loaded in the ADF paper chute. * The ADF is completely closed. * The cable is correctly connected (if using a USB hub, check its power supply). If the Function Number Display shows an alarm or error, turn the power off and on again.
How to fix Fujitsu FI-5015C error U0?
To resolve a 'U0' error on your Fujitsu Scanner, confirm that the shipping lock is released.
How to fix Fujitsu FI-5015C Scanner error U9?
To resolve a 'U9' error on your Fujitsu Scanner, turn off the scanner, confirm or connect the ADF cable, and then turn the scanner back on.
What to do if Fujitsu FI-5015C Scanner is not scanning?
If the Fujitsu Scanner isn't starting the scanning process, consider the following: * Make sure the document is loaded correctly in the ADF paper chute. * Ensure the ADF is completely closed. * Check the cable connection, especially if using a USB hub; verify the hub's power supply. * Turn the power off and on again. If the alarm persists, contact your place of purchase or an authorized Fujitsu service provider.
Why is there a shadow on the leading edge of the generated image of Fujitsu FI-5015C Scanner?
If there is a shadow on the leading edge of the generated image from your Fujitsu Scanner: * Clean the Pinch rollers. * Adjust the [Sub-scan Setting] in [Scanners and Cameras] in the control panel.
Why does the generated image shift or is distorted on Fujitsu Scanner?
If the generated image from your Fujitsu Scanner shifts or is distorted, ensure that the documents are loaded correctly.
How to fix vertical lines on Fujitsu Scanner?
If vertical lines appear in the generated image from your Fujitsu Scanner, clean the glass following the provided instructions.
How to prevent multi feed on Fujitsu FI-5015C Scanner?
If you're experiencing frequent multi-feeds with your Fujitsu Scanner, try these solutions: * Scan the document using the flatbed. * Fan the documents before scanning, then correctly align and load them in the ADF paper chute. * Reduce the document stack to 4 mm thickness or less.
Why does my Fujitsu Scanner have vertical lines?
If you're seeing vertical lines in the scanned images from your Fujitsu Scanner, clean the glass according to the instructions in the Operator's Guide "3 Maintenance".
General