C
Christopher RasmussenSep 4, 2025
How to improve image quality on Fujitsu FI-5015C Scanner?
- JjennifermillerSep 4, 2025
If the generated image quality from your Fujitsu Scanner is unsatisfactory, clean any dirty areas on the scanner.
To Next PageTo Next Page
How to improve image quality on Fujitsu FI-5015C Scanner?
If the generated image quality from your Fujitsu Scanner is unsatisfactory, clean any dirty areas on the scanner.
Why is my Fujitsu Scanner not turning on?
If your Fujitsu Scanner isn't turning on, try the following: * Ensure the main switch is turned on. * Press the power button. * Verify that the AC cable and adapter are correctly connected. * Try disconnecting and reconnecting the AC cable and adapter. * Try pushing the power button again after Windows has completely started.
Why is my Fujitsu FI-5015C image distorted?
If the generated image from your Fujitsu Scanner is shifted or distorted, ensure that you load the documents correctly.
Why does my Fujitsu Scanner have vertical lines?
If you're seeing vertical lines in the scanned images from your Fujitsu Scanner, clean the glass according to the instructions in the Operator's Guide "3 Maintenance".
What to do if paper feed error occurred on Fujitsu FI-5015C?
If a paper feed error occurs on your Fujitsu Scanner: * Remove any jammed documents. * Ensure that the documents meet the paper conditions for scanning.
How to fix ADF error on Fujitsu FI-5015C?
To address an ADF error on your Fujitsu Scanner, turn the scanner off, check and reconnect the ADF cable, then turn the scanner back on.
What to do if paper is not fed on Fujitsu FI-5015C?
If paper is not being fed into your Fujitsu Scanner, or if a paper feed error occurs frequently, try the following: * Scan the documents using the flatbed. * Remove any documents from the flatbed. * Clean the Pick roller.
What to do if scanning does not start on Fujitsu FI-5015C Scanner?
If scanning doesn't start on your Fujitsu Scanner, ensure the document is correctly loaded in the ADF paper chute and that the ADF is completely closed. Check the cable connection, especially if using a USB hub, and verify the hub's power supply.
What to do if Fujitsu FI-5015C Scanner is not scanning?
If the Fujitsu Scanner isn't starting the scanning process, consider the following: * Make sure the document is loaded correctly in the ADF paper chute. * Ensure the ADF is completely closed. * Check the cable connection, especially if using a USB hub; verify the hub's power supply. * Turn the power off and on again. If the alarm persists, contact your place of purchase or an authorized Fujitsu service provider.
How to fix Fujitsu FI-5015C Scanner error U9?
To resolve a 'U9' error on your Fujitsu Scanner, turn off the scanner, confirm or connect the ADF cable, and then turn the scanner back on.
General