Fujitsu fi-5900C Replacement Procedure

-5900C Consumable ReplaCement and Cleaning instRuCtions
Cleaning the RolleRs With the Cleaning sheets
The cleaning sheets are designed to remove only loose paper dust and ink
from the rollers. Use them approximately every 10,000 sheets scanned.
They are to be used in between the thorough cleanings of the scanner. Us-
ing the cleaning sheets does not take the place of the more complete
cleanings described later in this section
Open the Pre-Imprinter Cover
While pressing the Scanner
sCan button , press the
poWeR button to turn the
scanner on.
Note:
The scanner Function Number
Display will display the items
to the right.
Stop pressing the sCan button.
Close the Pre-Imprinter Cover.
• Set the Hopper Guides to the
B4 width.
• Pull out the Stacker
Extension and adjust it to the
length of the cleaning sheet.
• Turn off the scanner.
• Access the Ofine Feed Test by following the steps below.
Stacker
Extension
Pre-Imprinter
Cover

Fujitsu fi-5900C Specifications

General

Brand	Fujitsu
Model	fi-5900C
Category	Scanner
Language	English