Fujitsu FI-6130 Instruction Manual

WARNING !!
TURN OFF SCANNER, DISCONNECT FROM POWER
AND
ALLOW TO COOL FOR AT LEAST 15 MINUTES
BEFORE SERVICING
Limitation of Liability
Before using this product, please read this manual carefully. If this
product is used incorrectly, unforeseen injury may occur.
Although best efforts have been made to ensure all information in this manual is correct,
Cranel Inc. assumes no liability to any party for any damage caused by errors or
omissions or by statements of any kind in this manual or future updates. Cranel Inc.
further assumes neither liability arising from the use of this product nor any liability for
incidental or consequential damages arising from the use of this manual. Cranel Inc.
disclaims all warranties regarding the information contained herein, whether expressed,
implied or statutory.
Kit Contents
Cleaning the Automatic Document Feeder
What to Clean
When to Clean
How to Clean
Using the Cleaning Paper
Cleaning the Flatbed
Replacing Consumables
Brake Roller
Pick Roller
Resetting Consumable Scan Counters
For inquiries during any of these procedures, contact:
Versitec Customer Support Center
1-800-224-3475

Fujitsu FI-6130 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
Auto document feeder (ADF) input capacity	50 sheets
Scan media weight	210 g/m²
Weight (imperial)	9.24 lbs
Dimensions (WxDxH)	301 x 160 x 158 mm
Standard media sizes	-A4 -A8
Compatible operating systems	-TWAIN -ISIS ScandAll PRO -Adobe Acrobat -QuickScan Pro -VRS
Sustainability certificates	ENERGY STAR
Power supply	38 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	4200 g