K
Kevin JamesAug 6, 2025
Why is my Fujitsu Scanner not starting the scan?
- AAlan PerezAug 6, 2025
If scanning doesn't start on your Fujitsu Scanner, ensure the document is correctly loaded on the ADF paper chute and that the ADF is completely closed. Also, verify that the cable is correctly connected, paying attention to the hub's power supply if you're using a USB hub. Check that the SCSI ID is correctly set using the SCSI ID switch on the rear of the scanner. If the Function Number Display shows an alarm or error, turn the power off and on again. If the alarm persists, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.