Fujitsu FI-6230 - Settings to Configure on the Scanner

The following events can be selected:
● Scan Button (Press the [Scan] button)
● Send to 1 to 9 (With a number from 1 to 9 displayed on the Function Number Display, press the [Send to]
button)
6. Select [ScandAll PRO] as the application to launch when an event occurs.
In Windows XP, select [Start this program] under [Actions], and select an application from the drop-down list on the
right.
7. Click the [OK] button.
HINT
To link another button, perform steps 3 to 7 again.
8. Launch ScandAll PRO.
From the [Start] menu, select [All Programs]→[Fujitsu ScandAll PRO]→[Fujitsu ScandAll PRO], and then ScandAll PRO
starts up.
9. From the [Tool] menu, select [Preferences].