6
2. Replace the current operator panel overlay
with the one for the language to be used,
and specify the language to be shown on
the LCD.
For how to replace the overlay and specify
the language setting, refer to "Chapter 3 How
to Use the Operator Panel" in the Operator’s
Guide.
3. Turn on your computer.
4. The scanner is automatically detected,
and the [Found New Hardware] dialog box
appears. Select [Locate and install driver
software (recommended)] to install the
driver, following the on-screen instructions.
5. Load a sheet into the scanner.
For loading a sheet, refer to "2.1 Loading
Documents" in the Operator's Guide.
6. Start up PaperStream Capture.
Windows
®
XP/Windows Vista
®
/Windows
Server
®
2008/Windows
®
7
Select the [Start] menu [All Programs]
[PaperStream Capture] [PaperStream
Capture].
Windows Server
®
2012/Windows
®
8
Right-click the Start screen, select [All apps]
on the app bar, and then select
[PaperStream Capture] under [PaperStream
Capture].
Windows Server
®
2012 R2/Windows
®
8.1
Click [] on the lower left side of the Start
screen, and then select [PaperStream
Capture] under [PaperStream Capture].
To display [], move the mouse cursor.
7. Click the [Scan] button in the Menu Area.
8. Click one of the three types of document
profiles that are prepared beforehand.
Below is an example of when the document
profile [Black and White] is clicked.
The document is scanned, and the
scanned image is displayed.
For information about other scanning features,
refer to "Chapter 4 Various Ways to Scan" in the
Operator's Guide.
Contact for Inquiries
Refer to the contact list on the last page of the
"Safety Precautions" document.
For a SCSI connection, turn on the
scanner and confirm that the LCD
shows [Ready]. Then, turn on your
computer.
Refer to "Chapter 7 Troubleshooting"
in the Operator's Guide, if you see
any unexpected characters on the
LCD.
To Previous Page
Loading...
