Fujitsu fi-7480 - Attach New Brake Roller to Shaft; Reinstall Brake Roller Shaft Assembly

fi-7480 / fi-7460 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS
4
5. Attach a new brake roller on the Brake Roller Shaft Assembly
a. Insert the Protrusion on the Brake Roller Shaft Assembly into the slot on the brake roller.
6. Attach the Brake Roller Shaft Assembly
a. Insert the left end of the Brake Roller Shaft Assembly into the hole in accordance with the
hole shape and then attack the right side of the shaft
b. Close the cover
7. Close the ADF
8. Reset the Brake Roller Counter