Getting started
2
1
1
3
3
3
3
► Place the feet on the casing (1). In doing so, make sure that the 4 clips (2) on the
feet are aligned above the corresponding holes in the casing.
► To secure the feet, press the clips in the direction of the arrow (2) until
they are felt to engage in the holes.
To protect your device against unauthorised removal of the feet, the feet
can also be secured with t wo screws each, of type M2.5x5 mm. These
are not included in the delivery scope.
► Secure the
feet with the screws (3).
Fujitsu 17
To Next Page
Loading...
