Fujitsu FUTRO S9010 - Connecting Microphone, Headphones, Line-Out and Line-In Devices; Connecting the Device to the Network (LAN); Connecting the Mains Adapter

Getting started
Connecting m icrophone, headphones, line-out
and line-in devices
MicrophoneHeadphonesLine-out devices
► Connect the microphone to the microphon e port.
► Connect the headphones to the
headphones po rt.
► Connect line-out devices to the a udio ou tput.
► Connect the external line
-in devices to the audio input.
Connecting the device to the network (LAN)
LAN
► Connect th e 10/100/1000 Base T network cable to the RJ45 LAN p ort.
Connecting the mains adapter
Preparingforo perationPowercable
Observe the safety n
otes in the en closed "Safety/Re gulations" manual.
The s upplied power c
able conforms to the requireme nts of the country in
which you purchase
d your device. Make sure that the po wer cable is approved
for use in the count
ry in which you intend to use it.
2
1
3
► Connect the mains cable (1) t o the
mains adapter.
► Connect the mains adapter cable (2) to
the DC jack (DC IN) of the de vice.
► Plug the mains cable (3) into a mains socket.
22 Fujitsu