Getting started
► Stand the device on the feet.
► If necessary, reconnect an y cables that were previously disconnected.
Horizonta
l operating position
If you wish to operate the device in th e horizontal operating position, use
the two feet supplied for horizontal operation.
Only mount the feet on t he device side shown in the diagrams.
Proceed as follows to prepare the device fo r the horizontal operating position:
HorizontaloperatingpositionOperatingposition, horizontalBasefeet
► Disconnect the cables if required.
► Lay the device on its right side as shown, on a stable, flat and clean surface.
16 Fujitsu
To Next Page
Loading...
