Getting started
Connecting external devices to the serial i nterface
SerialinterfaceSerialinterface,Externaldevices,Devi ces,
For an exact description of how to connect external devices to the corresponding
port, p lease see the external device documentation.
External devices (e.g. a printer or scanner ) can be connected to the serial port.
► Connect the data c able to the external device.
► Connect the data cable to the corresponding serial interface.
Port settings
Serialinterface,
You can change the settings of the port in the BIOS Setup.
Device drivers
Devicedrive rs,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect
a wide range of external devices to the USB ports (e.g.
printer, scann
er, mouse or keyboard).
USB devices ar
e hot-pluggable. This means you can connect and disconnect
USB cables whi
le your device is switched on.
Additional i
nformation can be found in the documentation for the USB devices.
► Connect the data c able to the external device.
► Connect the data cable to one of the U SB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the operating system. If the device requires separate so ftware , please follow
the instructions in the manufacturer’s documentation.
Fujitsu 21
To Next Page
Loading...
