To Next PageTo Next PageWhy is my Fujitsu Inverter Air Conditioner not cooling well?
Several factors can cause poor cooling performance in your Fujitsu Air Conditioner. Check if the air filter is dusty or if the air intake grille or outlet port is blocked. Ensure the thermostat is set correctly and that no windows or doors are open. For cooling, close curtains to block bright sunlight and reduce heat-generating appliances or the number of people in the room.
Why is water produced from the outdoor unit of my Fujitsu Air Conditioner?
During heating operation, water may be produced from the outdoor unit of your Fujitsu Air Conditioner due to the Automatic Defrosting operation.
How to improve cooling or heating performance of Fujitsu Air Conditioner?
If your Fujitsu Air Conditioner isn't cooling or heating well, check if the air filter is dirty or if the intake grille or outlet port are blocked. Ensure the temperature settings are correct and that no windows or doors are open. For cooling, close curtains to block sunlight and reduce heat sources like computers. Also, verify that the unit isn't set to SUPER QUIET operation and that the lower air outlet is not blocked.
Why is my Fujitsu Inverter Air Conditioner airflow weak or stops?
Weak or stopped airflow in your Fujitsu Air Conditioner can occur for several reasons. When heating starts, fan speed is temporarily very low to allow internal parts to warm up. During heating, if the room temperature exceeds the thermostat setting, the outdoor unit will stop, and the indoor unit will operate at a very low fan speed. The unit may also temporarily stop during the Automatic Defrosting mode (between 4 and 15 minutes). The fan may operate at very low speed during Dry operation or when the unit is monitoring the room’s temperature. Also, in monitor AUTO operation, the fan will operate at very low speed.
Why is my Fujitsu Air Conditioner not operating immediately?
If your Fujitsu unit is stopped and immediately restarted, the compressor won't operate for about 3 minutes to prevent fuse blowouts. Also, when the electrical breaker is turned off and on again, the protection circuit will operate for about 3 minutes, preventing operation.
What to do if Fujitsu Inverter Air Conditioner doesn’t operate at all?
If your Fujitsu Air Conditioner doesn't operate at all, check if the circuit breaker has been turned off or if there has been a power failure. Also, verify if a fuse has blown out or a circuit breaker has been tripped, and ensure the timer is not operating.
Why Fujitsu Air Conditioner doesn’t operate immediately?
If your Fujitsu Air Conditioner doesn't operate immediately after being turned on, it could be due to a built-in delay. The compressor will not operate for about 3 minutes after being stopped and immediately restarted to prevent fuse blowouts. Also, the protection circuit will operate for about 3 minutes after the electrical breaker is turned off and on again, or the power supply plug is disconnected and reconnected.
Why Fujitsu Inverter emits mist or steam?
During cooling or dry operation with your Fujitsu Air Conditioner, a thin mist may be emitted from the indoor unit. This happens due to the sudden cooling of room air, resulting in condensation and misting. During heating, the outdoor unit’s fan may stop, and steam may rise from the unit due to automatic defrosting operation.
Why Fujitsu Inverter Air Conditioner produces water from the outdoor unit?
During heating operation of your Fujitsu Air Conditioner, water may be produced from the outdoor unit because of the automatic defrosting operation.
Why Fujitsu Air Conditioner smells?
Some smell may be emitted from the indoor unit of your Fujitsu Air Conditioner because room smells (furniture, tobacco, etc.) have been taken into the indoor unit.
General| Brand | Fujitsu |
|---|---|
| Model | Inverter |
| Category | Air Conditioner |
| Language | English |
