To Next PageTo Next PageHow to adjust brightness on Fujitsu L20T-1 ECO?
If the picture on your Fujitsu Monitor is too light or too dark, first, try the auto-adjustment function using the AUTO button (if present) or through the OSD menu. If the results are not satisfactory, manually adjust the contrast and brightness settings via the OSD menu.
How to correct the picture position on my Fujitsu L20T-1 ECO?
If the picture position on your Fujitsu Monitor is incorrect, it might be due to the monitor recognizing an undefined mode. Try performing the auto-adjustment of the monitor using the AUTO button (if available) or through the OSD menu. If that doesn't correct it, manually set the picture position using the OSD menu.
What to do if my Fujitsu L20T-1 ECO has power but no display?
If your Fujitsu Monitor's power indicator is lit but there's no display, first, ensure your computer is powered on. Next, check that the monitor's data cable is securely connected to the computer's monitor port. If it's still not working, press any key on the keyboard in case the computer is in energy-saving mode. Finally, adjust the brightness and contrast settings until you see a picture.
How to fix a Fujitsu Monitor with no screen display and no power light?
If your Fujitsu Monitor's screen isn't displaying anything and the power indicator is off, start by checking if the monitor is switched on. Then, make sure the power cable is correctly connected to the monitor. Finally, verify that your computer is also switched on.
What to do if my Fujitsu Monitor says 'No Video Input' or 'No Signal'?
If your Fujitsu Monitor displays a 'No Video Input' or 'No Signal' message, verify that the data cable is securely connected to the monitor port on your computer. Also, ensure that your computer is turned on.
Why is the picture shaking on my Fujitsu L20T-1 ECO?
If the picture on your Fujitsu Monitor is shaking, first, ensure the data cable is properly connected to the monitor port on your computer. If the issue persists, perform the auto-adjustment function on the monitor, either using the AUTO button (if available) or through the OSD menu.
How to fix 'Frequency out of range' error on my Fujitsu Monitor?
This message on your Fujitsu Monitor indicates that the input signal's horizontal frequency and refresh rate don't match the monitor's specifications. Adjust the video frequency range using your computer's software, referring to your computer or graphics card documentation. Alternatively, adjust the screen resolution using your computer's software, consulting the documentation for your computer or screen controller.
What causes vertical lines on my Fujitsu Monitor screen?
If you're seeing vertical lines or other picture disturbances on your Fujitsu Monitor, try performing the auto-adjustment of the monitor. You can do this either by using the AUTO button (if your monitor has one) or through the OSD menu.
General| Screen Size | 20 inches |
|---|---|
| Resolution | 1600 x 900 |
| Panel Type | TN |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Dynamic Contrast Ratio | 2, 000, 000:1 |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 160° |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Connectivity | VGA, DVI |
Specifications for the monitor's physical dimensions and weight.
Technical specifications related to power supply and consumption.
Operating and storage conditions for temperature and humidity.
Factory-set optimal display modes for various resolutions.
Identifies the intended audience for this user manual.
Explains symbols, fonts, and text conventions used in the manual.
Guidance on where to find details on screen resolution and refresh rate.
Crucial safety precautions for using the LCD monitor.
Instructions for connecting the data and power cables to the monitor.
Guidance on connecting the monitor to the computer's ports.
How to adjust the tilt angle of the monitor screen.
Steps for turning the monitor power on and off.
Resolving problems related to no screen display or indicator lights.
Troubleshooting steps for 'No Video Input' or 'No Signal' messages.
Addressing issues when display mode or frequency is out of range.
Correcting incorrect picture position or undefined display modes.
Resolving issues with shaking images, vertical, or horizontal lines.
Adjusting brightness and contrast for optimal picture quality.
Information on acceptable limits for unlit or lit pixels.
