Security functions
Password protection for the hard disk
Passwordpr otection:
The had disk password prevents unauthorized access to the hard disk drives an d
is checked internally each time the system is boo ted. The condition for this is
that you have assigned a t least the supervisor HDD passw ord.
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu .
If you have not assigned BIOS passwords yet, define the supervisor and the user HDD
password now, if desired (see "
Secu rity functions", Page 3 9).
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area mark the Set Master Password field and press the Enter key.
Enter new Password then appears and you are asked to enter a password.
► Enter the passw ord and press the Enter key.
Confirm new Password requires you to con firm the password.
► Enter the password again and press the Enter key.
Setup Notice: Changes have b ee n saved is displayed to confirm that the
new password has been saved.
► To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the field Set Master Password, then proceed in exactly the same way as for
setting up the password for the first hard disk (Drive0).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the opt ion Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook reboots and your hard disk is now protected with a passwo rd. The system
will ask you to enter the password when the notebook is re started again.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security menu .
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area mark the Set Master Password field and press the Enter key.
You will be initially requested to en ter t he old password by the Enter current Password prompt.
You will then be requested to enter a new password by the E nte r new Password prompt.
► After entering the password, press the Enter key three times.
► From the Exit menu, choose the opt ion Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook reboots, and password protection for the hard disk is cancelled.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Drive0).
42 Fujitsu
To Next Page
Loading...
