First-time setup of your device
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the de vice before setting it up. Follow
the instructions below when doing so :
• Never place the device or the mains adapt er on a heat-sensitive surface.
The surface could be damaged as a result.
• Never p lace the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause o verheating and damage.
• The underside of the device heats u p during norma l operation. Prolonged contact
with the skin may become unp leasant or even result in burns.
• Place the device on a stable, flat, no n-slippery surface. Please note that the
rubber feet of th e device may mark certain types of delicate surfa ces.
• Keep o ther objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The su pplied power cable confo rms to the requirements of the country in
which you pu rchased your device. Make sure that the power cable is approved
for use in the country in which y ou intend to use it.
3
1
2
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a m ains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu Technology Solutions 17
Downloaded from LpManual.com Manuals
To Next Page
Loading...
