44
- Quick Point Pointing Device/Touch Screen
Clicking
To left-click, touch the object you wish to select
and then lift the stylus tip immediately. You also
have the option to perform the left-click operation
by tapping lightly with your finger on the Touch
Screen once. (Figure 19)
Right-Clicking
Windows Vista:
Right-click can be accomplished by holding the
pen down until a circular icon appears. To change
the settings for the right-click feature, go to Start >
Control Panel > Pen and Input Devices. In the Pen
Options tab, select “Press and Hold” then click the
[Settings] button.
Windows XP Tablet PC Edition:
Right-click can be accomplished by holding the
pen down until a circular icon appears. To change
the settings for the right-click feature, go to Start >
Control Panel > Tablet and Pen Settings. In the Pen
Options tab, select “Press and Hold” then click the
[Settings] button.
Figure 19. Clicking the Touch Screen
Windows XP Professional Edition:
Right-click can be accomplished by holding the
pen down until a circular icon appears. To
change the settings for the right-click feature, go
to Start > Control Panel > Touch Panel. From
the Right Button Simulation tab you can specify
a right button tool by using the selected button
prior to the desired right mouse click.
To Next Page
Loading...
