Fujitsu LIFEBOOK P728 - Installing the M.2 Module

Removing and installing components
during servicing
► Pull the M.2 module out of the slot on the mainboard in the direction of
the arrow (2) and remove it from the casing.
► Fasten the cover again, see "
Attaching the cover", Page 84
Installing the M.2 module
► Remove the cover, see "Rem
ove the cover", Page 78
2
1
2
► Position the M.2 module in the slot on the mainboard at a slight angle,
in the direction of the arrow (1).
► Secure the M.2 module in its location with the screw (2).
Fujitsu 83