Fujitsu LIFEBOOK P770 - Miscellaneous Configurations Submenu of the Advanced Menu; Default Description

17
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume.
Figure 12. Miscellaneous Configurations Submenu
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field Options Default Description
Power Button:
■
Disabled
■
Power Off
[Disabled] Selecting Disabled disables the power button. Selecting Power Off allows
you to turn off system power with the power button.
Wake up on LAN:
■
Disabled
■
Enabled
[Disabled] Selecting Enabled allows the system to wake when the internal LAN device
receives a specific signal while in power-off state. Selecting Disabled disables
this feature.
On Battery:
■
Disabled
■
Enabled
[Enabled] When disabled, [Wake up on LAN] is enabled only when an AC Adapter is
connected and [Wake up on LAN] is enabled.
Force LAN Boot:
■
Disabled
■
Enabled
[Disabled] This feature is active only when “Wake up on LAN” is enabled. When
enabled, in the event of a system wake-up on LAN, the system will try to first
boot from the LAN before attempting to boot from any other device,
regardless of the BIOS boot priority settings or disabling of the Preboot
Execution Environment.
Resume on LAN:
■
On AC mode only
■
Always Enabled
[Always
Enabled]
When [On AC mode only] is selected, Wake up on LAN from Hibernation
state is enabled only when an AC Adapter is connected.
Auto Save To Disk:
■
Off
■
On
[On] Turns the Auto Save To Disk feature off and on. When turned on, a
suspended system will save it state to disk and then turn off when a low
battery state is reached.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
Power Button:
Wake up on LAN:
On Battery:
Force LAN Boot:
Resume on LAN:
Auto Save To Disk:
Volume Setting:
Hardware Power Management:
FAN/CPU Control:
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Always Enabled]
[On]
[Middle]
[Enabled]
[Normal]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit
Advanced Menu