26
LifeBook Q2000 Series User’s Guide
2. Press the [F2] key once the Fujitsu logo appears on
the screen; this will open the main menu of the BIOS
Setup Utility with current settings displayed.
3. Press the right or left arrow keys to scroll through
the other setup menus to review or alter the current
settings. Additional navigational information is
located at the bottom of the BIOS screen.
BIOS Guide
A guide to your notebook’s BIOS is available online at
our service and support website at http://
www.computers.us.fujitsu.com/support. Once there,
select Support, then Notebooks under User’s Guides.
Select LifeBook BIOS Guides from the pull-down menu
for your LifeBook series. If you are unsure of your note-
book’s BIOS number, refer to your packing slip
.
BOOTING THE SYSTEM
We strongly recommend that you not attach any external
devices and do not put a DVD/CD in your drive until
you have gone through the initial power on sequence.
When you turn on your LifeBook notebook for the first
time, it will display a Fujitsu logo on the screen. If you
do nothing the system will load the operating system,
and then the Windows Welcome will begin.
Registering Windows with Microsoft
In order to ensure that you receive the most benefits
from the Windows operating system, it should be
registered the first time you use it.
After you receive the Windows Welcome screen, you will
be prompted to enter registration information in the
following order.
First of all, you will need to read and accept the End User
License Agreements (EULAs). After accepting the
EULAs, you will be asked if you want to enable the Auto-
matic Updates feature. Acceptance of this feature is
recommended because it allows your system to be
updated automatically whenever an important change
becomes available for your notebook.
Several additional windows will appear, prompting you
to enter a name and description for your computer, an
Administrator password, and a domain name. Read the
instructions on the screens carefully and fill in the infor-
mation as directed.
You will then be automatically connected to the Internet
if you have an appropriate connection available. If a
connection is not possible, you will be asked about how
you dial out from where you will be using your note-
book. If you are not connected to a phone line and plan
to register at a later time, you may click the Skip button.
Once you are connected to the Internet, you will be
asked if you wish to continue with the registration. If
you select Ye s you will then enter your name and
address, and email address if desired. Click Next to
complete registration.
REGISTERING YOUR LIFEBOOK NOTEBOOK
How do I register my LifeBook notebook?
You can register your LifeBook by going to our website:
us.fujitsu.com/computers
You will need to be set up with an Internet Service
Provider (ISP) to register online.
INSTALLING CLICK ME!
The first time you boot up your system, you will see an
icon called Click Me! in the Start menu. We highly
recommend that you install the ClickMe! utility the first
time you boot up. When you click the Click Me! icon,
your system will automatically build the icon tray in the
bottom right of the screen. These icons provide links to
utilities you will frequently access., such as wireless LAN
software provided by the wireless LAN manufacturer.
FUJITSU DRIVER UPDATE UTILITY
Your system has a convenient tool called Fujitsu Driver
Update (FDU). With FDU, you can choose to automati-
cally or manually go to the Fujitsu site to check for new
updates for your system. For more information about
FDU, refer to “Automatically Downloading Driver
Updates” on page 56.
If your data security settings require it, you
may be asked for a password before the
BIOS main menu will appear.
■
If you reject the license agreement you’ll
be asked to review the license agreement
for information on returning to Windows
or to shut down your notebook.
■
You cannot use your notebook until you
have accepted the License Agreement. If
you stop the process your notebook will
return to the beginning of the Windows
Welcome Process, even if you shut your
notebook down and start it up again.
Before installing the ClickMe! utility, be
sure the wireless LAN switch is turned on.
There may be additional third-party
applications that are not installed by the
ClickMe! utility. For more information,
refer to your Getting Started Guide.
ClickMe!
Q2010.book Page 26 Wednesday, May 24, 2006 1:36 PM
To Next Page
Loading...
