Fujitsu Lifebook S935 - Module and Drive Operations; Module Installation and Removal

Working with the notebook
► Press the battery cover down at the rear edge (4).
► To securely fasten the battery cover, engage it b y pressing in the direction
of the arrow (5) at the rear edge as well.
► Complete the removal, see chapter "
Finishing component removal", Page 70.
Module
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following mo dules can be operated in the module bay of your notebook:
• Second battery
• Optical drive
• Second hard disk drive
• Empty plug-in unit (save weight)
• LIFEBOOK Bay Projector
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
Log off th e module via the corresponding symbol in the task bar.
The module can now be removed without any further actions being necessary.
Removing a module
1
2
Modu
le
Driv
e
Weig
htSaver
► Slide the release m echanism (1) in the direction of the arrow and hold.
► Pul
l the module (2) out of the module bay.
Fujitsu 37