Connecting e xtern a l devices
Connecting an external monitor to the Port Replicator
An analogue monitor is conn ecte d to the analogue VGA monitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see "
Key
combinations", Page 27, section "Toggle output monitor").
MonitorVGAconnec tionsocketMonitorportMonitor p ort
Digital DisplayPort
Analogue VGA monitor port
Digital DVI-D monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external m on itor and the LCD monitor of the
notebook, see chapter "
Key combinatio ns", Page 27.
You can display the same picture o n the external monitor and the
notebook LCD monitor simultaneously.
Fujitsu 63
To Next Page
Loading...
