Removing and installing components
during servicing
Installing a memory module
2
a
1
► Insert the mem ory m odule with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
1
2
1
2
► Place the cover into position, follow ing the direction of the arrow (1).
► Fasten the cover in place with the screw (2).
► Complete the memory extension, see "
Finishin g component rem oval", Page 70.
Finishing component removal
After you have remo ved or changed the system components as you required, please
prepare your device for operation again as follows:
► In stall the battery ag ain (see "
Installing a battery", Page 36 ).
► Turn the not ebook the right way up again a nd place it on a flat surface.
► R eco nnect the cables that you disconnected before.
70 Fujitsu
To Next Page
Loading...
