Working with t he notebook
Wireless LAN / Bluetooth / wireless components
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the key with the wireless icon (key
F5
) to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The w ireless indicator will illuminate when one or more wireless components are switched on.
If you switch off the wireless components, the w ireless LAN antenna
and the Bluetooth will also be switched off.
You can activate and deactiva te the installed wireless component s
individually using the WirelessSelector program.
Pay attention to the additional safety notes for devices with wireless components
provided in the "
Important notes", Pag e 21 section.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring W LAN access can b e found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this O pera ting M a nual.
For W LAN specifications, see chapter "
WLAN specifications", Page 94.
Fujitsu 49
To Next Page
Loading...
