Fujitsu LIFEBOOK U728 - The Notebook Does Not Start after Switching It on; The Notebook Stops Working; The Printer Does Not Print

Tro ubl eshooting and tips
The notebook d oes not start after switching it on
Notebook
Cause Troubleshooting
The battery is not installed correctly.
► Check whether th e battery is installed
correctly in its compartment.
► Switch t he notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The AC adapter is not connected properly. ► C heck whether the AC adapter is properly
connected to the notebook.
► Switch t he notebook on.
The notebook stops working
NotebookEnding
Cause Troubleshooting
The notebook is in energy saving mode. ► End energy saving mode.
An application program has cau sed the
malfunction.
► Close the application program or restart
the notebook (by restarting the ope rating
system or sw itching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with t he printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The p
rinter driver is faulty or not correctly
inst
alled, or it is the wrong printer driver.
► Chec
k whether the correct printer driver is
load
ed (refer to the printer documentation).
Fujitsu 89