Removing and installing components
during servicing
Installing a hard disk
► If relevant, remove the M.2 adapter from the service compartment.
Always insert the hard disk into the device in the relevant hard disk carrier.
1
► Slide the hard d
isk into the hard disk carrier (1).
3
3
2
► Attach the connector to the hard disk (2).
► Place the hard disk into the hard disk compartmen t (3).
► Connect the hard disk c ables to the mainboard.
► Fasten the cover again, see "
Attaching the cover", Page 78.
Fujitsu 81
To Next Page
Loading...
