Fujitsu LIFEBOOK U728 - Installing the M.2 Module; Removing the M.2 Module

Removing and installing components
during servicing
Installing the M.2 mo dule
► LIFEBOOK U758: If relevant, insert the M.2 adapter in the service compartment.
1
2
► Position the M.2 module in the slot on the mainboard at a slight angle,
in the direction of the arrow (1).
► Secure the M.2 module in its location with the screw (2).
Removing the M .
2 module
2
1
► Loosen the screw (1).

The M.2 module folds slightly upwards.
► Pull the M.2 module out of the slot on the mainboard in the direction of
the arrow (2) and remo ve it from the casing.
► LIFEBOOK U758: If you wish to install an HD D hard disk instead of another M.2 module,
remove the M.2 adapter (under the M .2 module) from the s ervice compartment and install the
HDD, see "
Removing and in stalling the hard disk (HDD, LIFEBOOK U758 only)", Page 79.
Fujitsu 77