Connecting external devices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor port, a digital monitor
to the Displayport or the DVI-D monitor port on the optional Port Replicator. Screen
output is limited to a maximum of two screens at any one time (see
"Function keys and
key combinations", Page 32, section "Toggle output screen").
MonitorVGAcon nectionsocketMonitorportMonitorport
Digital Displayport (on notebook or on optional
Port Replicator)
Analogue VGA monitor port (on notebook or on
optional port replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter "Function keys and key combinations", Page 32.
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
62 Fujitsu
To Next Page
Loading...
