Removing and installing components
during servicing
Installing a hard disk
► If applicable, remove the M.2 adaptor from the service compartment.
Always install the hard disk into the device in the corresponding hard disk carrier.
1
► Slide the hard d
isk into the hard disk carrier.
3
3
2
► Attach the connector to the hard disk (2).
► Place the hard disk into the hard disk compartment (3).
► Connect the hard disk connector to the mainboard.
► Re-fasten the cover, see
"Attaching the cover", Page 74.
Fujitsu 77
To Next Page
Loading...
