CX400 M4 Disassembly and Recycling Instructions 7
1 Disassembly and recycling
1.1 Recycling information
This manual provides instructions to disassembly the PRIMERGY CX400 M4
Server Enclosure and the PRIMERGY CX25x0 M4/M5 Server Nodes. All
materials can be disposed according to the regulation in the EU Directive
2012/19 / EU (Waste Electrical and Electronic Equipment (WEEE)).
Product group: Server
Model:
PRIMERGY CX400 M4 Server Enclosure and CX25x0 M4/M5 Server Nodes
Materials that must be disposed of separately
Description Part Number
Circuit boards
With a surface larger than 10 cm
2
System board (on server node)
Midplane
Chassis interface board
HDD/SSD bridge board
Expansion cards (on server
node)
Power supply unit
1 - 4
1
1
1
several
1-2
Batteries Lithium battery CR2450 (on
server node)
1-4
Mercury-containing components
Liquid crystal displays (optionally
together with the housing) with a surface
of more than 100 cm
2
and backlit displays
with gas discharge lamps
Cathode ray tubes
PCB-containing capacitors
(PCB: polychlorinated biphenyls)
Electrolytic capacitors containing
substances of concern (height> 25 mm,
diameter:> 25 mm or proportionally
similar volume)
Power supply unit
External cables
Gas discharge lamps
To Next Page
Loading...
Need help?
General