RX1330 M1
Operating Manual 11
1 Introduction
The PRIMERGY RX1330 M1 server is an Intel
®
-based server for small and
medium-sized networks and can be used in the rack systems made by Fujitsu
and in current standard rack systems made by various other manufacturers.
Thanks to its highly developed hardware and software components, the
PRIMERGY RX1330 M1 server offers a high level of data security and
availability. These include the Server Management ServerView Suite, Prefailure
Detection and Analysis (PDA) and Automatic Server Reconfiguration and
Restart (ASR&R).
Security functions in the BIOS Setup and on the system board protect the data
on the server against manipulation. Additional security is provided by the
lockable rack door.
The server occupies 1 height unit in the rack.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY RX1330 M1 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
To Next Page
Loading...
Need help?
General