Fujitsu PRIMERGY RX1330 M1 User Manual

74 Operating Manual RX1330 M1
Starting up and operation
6.3.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configuring the onboard SAS/SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 71.
Configuring the onboard SAS controller with “Integrated Mirroring
Enhanced”
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 71.
Configure SAS/SATA RAID controller with "MegaRAID functionality"
Configure the controller as described in section "Configuring the SAS/SATA
RAID controller" on page 72.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.

Fujitsu PRIMERGY RX1330 M1 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	1U Rack
Processor	Intel Core i3 product family Intel Pentium product family
CPU Family	Intel Xeon
Memory Type	DDR3 UDIMM
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4
RAID	0, 1, 5, 10
RAID Controller	Optional
Network	2 x Gigabit Ethernet
Operating System Support	Windows Server, Red Hat Linux, SUSE Linux