Fujitsu PRIMERGY RX1330 M1 User Manual

Operating Manual RX1330 M1
Contents
5.4.1 Using cable ties (standard PSU) . . . . . . . . . . . . . . . . . 55
5.4.2 Using the cable clamps (hot-plug PSU) . . . . . . . . . . . . . . 56
5.5 Notes on connecting/disconnecting cables . . . . . . . . . . 57
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 59
6.1 Control elements and indicators . . . . . . . . . . . . . . . . 59
6.1.1 Front of the server . . . . . . . . . . . . . . . . . . . . . . . . 59
6.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 60
6.1.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 61
6.1.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1.1.4 Indicators on the accessible drives/components . . . . . . . 64
6.1.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.2 Switching the server on and off . . . . . . . . . . . . . . . . 69
6.3 Configuring the server . . . . . . . . . . . . . . . . . . . . . 71
6.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 71
6.3.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 72
6.3.3 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 73
6.3.4 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 74
6.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 75
7 Property and data protection . . . . . . . . . . . . . . . . . . 77
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 77
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 79
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 79
8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 80
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 80
8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 81
8.5 No screen display or display drifts . . . . . . . . . . . . . . . 81
8.6 No mouse pointer displayed on screen . . . . . . . . . . . . 81

Fujitsu PRIMERGY RX1330 M1 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	1U Rack
Processor	Intel Core i3 product family Intel Pentium product family
CPU Family	Intel Xeon
Memory Type	DDR3 UDIMM
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4
RAID	0, 1, 5, 10
RAID Controller	Optional
Network	2 x Gigabit Ethernet
Operating System Support	Windows Server, Red Hat Linux, SUSE Linux