RX200 S7 Operating Manual 33
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in "Important information" on
page 35.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 50).
Ê Make sure that you have all necessary manuals (see "Documentation
overview" on page 12); print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see "Installing/removing the server in/from
the rack" on page 51).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 53 and "Notes on connecting/disconnecting cables" on
page 57.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 55).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Controls and indicators" on page 59).
To Next Page
Loading...
