RX200 S7 Operating Manual 53
Hardware installation
5.3 Connecting devices to the server
The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "PRIMERGY RX200 S7 Server
Upgrade and Maintenance Manual".
The standard connectors are marked with symbols, and some are color-coded:
Figure 2: Connection panel on the rear
I Some of the devices that can be connected may require the installation
and setting up of special software (e.g. drivers) (see the documentation
for the connected device).
Ê Connect the desired devices to the server.
1 Shared LAN connector 4 Video connector (for standard
operation)
2 Standard LAN connector 5 3 USB connectors
3 Management LAN connector
To Next Page
Loading...
