Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
PRIMERGY RX200 S8 Status 30-01-2014
D
Section
II
Processor
There are 2 processor sockets available.
The first socket is always equipped with the first CPU which can be selected via configurator
It is also possible to upgrade a dual-processor system later on with a second CPU
Two processors with different type are not possible
If 1CPU with a TDP >= 115W is used, the hot plug redundant fan kit (S26361-F1386-E120) is required.
If 2CPUs are used, the hot plug redundant fan kit (S26361-F1386-E120) is required.
If Cool-safe Advanced Thermal Design is used, the hot plug redundant fan kit (S26361-F1386-E120) is required.
A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit
One of following CPU´s has to be selected as first CPU
for an orderable basic unit
Optional second CPU has to be the same type like the first CPU
Basic 4C CPU's Max. DDR3 Bus Speed depends on:
- 1x 64-bit Intel Xeon (10MB Smart Cache)
- max. DDR3 Bus Speed from the CPU and
1333 MHz DDR3 Bus; 6,40 GT/s QPI Bus and passive heat sink - max. DDR3 Memory Speed and
occupies socket for one CPU - max. memory modules on one memory channel
Xeon E5-2603v2 4C/4T 1.80GHz 10MB 6.40GT/s 1333MHz 80W S26361-F3800-E180 For CPUs which do not offer 1866 MHz support,
Xeon E5-2609v2 4C/4T 2.50GHz 10MB 6.40GT/s 1333MHz 80W S26361-F3800-E250 (Basic, Standard & Low Power class),
Standard Turbo 6C/8C CPU's System Architect will not offer memory modules
- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);
supporting this frequency.
1600 MHz DDR3 Bus; 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2620v2 6C/12T 2.10GHz 15MB 7.20GT/s 1600MHz 80W S26361-F3801-E210
Xeon E5-2630v2 6C/12T 2.60GHz 15MB 7.20GT/s 1600MHz 80W S26361-F3801-E260
Xeon E5-2640v2 8C/16T 2.00GHz 20MB 7.20GT/s 1600MHz 95W S26361-F3801-E200
Advanced Turbo+ 8C/10C CPU`s
- 1x 64-bit Intel Xeon (20/25MB Smart Cache); Hyper-Threading (HT);
1866 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2650v2 8C/16T 2.60GHz 20MB 8.00GT/s 1866MHz 95W S26361-F3802-E260
Xeon E5-2660v2 10C/20T 2.20GHz 25MB 8.00GT/s 1866MHz 95W S26361-F3802-E220
Xeon E5-2670v2 10C/20T 2.50GHz 25MB 8.00GT/s 1866MHz 115W S26361-F3802-E250
Xeon E5-2680v2 10C/20T 2.80GHz 25MB 8.00GT/s 1866MHz 115W S26361-F3802-E280
Xeon E5-2690v2 10C/20T 3.00GHz 25MB 8.00GT/s 1866MHz 130W S26361-F3802-E300
Segment Optimized CPU`s
- 1x 64-bit Intel Xeon (15/25/30MB Smart Cache); Hyper-Threading (HT);
1866 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2637v2 4C/8T 3.50GHz 15MB 8.00GT/s 1866MHz 130W S26361-F3803-E350
Xeon E5-2643v2 6C/12T 3.50GHz 25MB 8.00GT/s 1866MHz 130W S26361-F3803-E330
Xeon E5-2667v2 8C/16T 3.30GHz 25MB 8.00GT/s 1866MHz 130W S26361-F3803-E300
Xeon E5-2695v2 12C/24T 2.40GHz 30MB 8.00GT/s 1866MHz 115W S26361-F3803-E240
Xeon E5-2697v2 12C/24T 2.70GHz 30MB 8.00GT/s 1866MHz 130W S26361-F3803-E270
Low Power 6C/10C CPU's
- 1x 64-bit Intel Xeon (15/25MB Smart Cache); Hyper-Threading (HT);
1600 MHz DDR3 Bus; 7,20/8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2630Lv2 6C/12T 2.40GHz 15MB 7.20GT/s 1600MHz 60W S26361-F3804-E240
Xeon E5-2650Lv2 10C/20T 1.70GHz 25MB 8.00GT/s 1600MHz 70W S26361-F3804-E170
E
Fujitsu PRIMERGY Server 10 of 28

Fujitsu PRIMERGY RX200 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX200 S8
Category	Server
Language	English