Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
PRIMERGY RX200 S8 Status 30-01-2014
C
PRIMECENTER Rack
S26361-F2735-E145 S26361-F2735-E175 S26361-F2735-E111 Further information for
RMK-F1_DI_CMA_QRL
Rack Mount Kit F1-C S7 LV
No Rackmount-Kit option
rack mounting is available
best choice for PrimeCenter racks best choice for 3rd party racks
Only for loose deliveries within the
consisting of consisting of
No mounting in racks possible Corporate Partner Portal
vario carrier 714-785mm
vario carrier 559-914mm
max. 1x per system
telescopic drop-in rails 781mm telescopic drop-in rails 781mm All "L" no's for loose delivery
with quick release lever support
with quick release lever support
with full extraction with full extraction
S26361-F2735-L10
with CMA adapter with CMA adapter Adapter angle PC/DC-Rack, till 50Kg
1x per system
1x per system
B necessary for mounting RMKs in
asymmetrical PC racks
S26361-F2735-L145
RMK-F1_DI_CMA_QRL
S26361-F4530-E11
S26361-F4530-E10
best choice for PrimeCenter racks
Mounting 1U server in Mounting in with CMA adapter
asymmetrical racks symmetrical racks
with 1U support bracket (no support bracket needed) S26361-F2735-L175
RMK-F1_DI_CMA_QRL_LV
best choice for 3rd party racks
S26361-F2735-E81
with CMA adapter
Cable mgmt. arm for 1U server
Cable Management Arm can
- for Fujitsu PRIMECENTER S2
only be used for FTS RMKs
S26361-F2735-L81
or all PRIMECENTER M1 racks
with CMA adapter
Cable mgmt. arm for 1U server
- for 3rd Party racks for 1U servers in racks with L175
1x per system
S26361-F2735-L176
RMK-F1_DI_QRL_LV
best choice for 3rd party racks
S26361-F1647-E302 w/o CMA adapter
Installation ex works for one
server or subsystem. S26361-F2735-L8
Hereby the rack will be delivered cable arm 1U PCR M1 S and 3rd p.-racks
completely pre-mounted and
for L176, has to be mounted on rack pillar
all wired connections are tested. "Rack-mounting ex factory"
With PCR S2 12U, 24U, 38U and This service is to be ordered once S26361-F2735-L7
PRC M1 16U, 24U, 42U: per installable server/storage
Lateral cable management (optionally)
Systems and components subsystem, in order to get the can only be mounted
will be delivered installed in the rack server/storage subsystem in asymmetrical PRIMECENTER
With PCR S2 racks 46U: mounted into the racks.
S2 or new M1 racks in 1U above RMK
Systems and components
In case of the 46 U PCR S2
will be delivered separately this service has to be ordered,
To be ordered only together with to get the mounting kits and the
a PRIMECENTER rack
cables installed.
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System PRIMERGY Classic 19" rack is not supported
D
Fujitsu PRIMERGY Server 9 of 28

Fujitsu PRIMERGY RX200 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX200 S8
Category	Server
Language	English