EasyManua.ls Logo

Fujitsu PRIMERGY RX200 S8 - Page 8

Fujitsu PRIMERGY RX200 S8
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System configurator and order-information guide
PRIMERGY RX200 S8 Status 30-01-2014
B
Rack version for 19'' racks with
No PSU included in Base Unit
For an orderable basic unit one CPU = first CPU,
one memory = first memory
one PSU = first PSU as well as
Full redundancy cannot be guaranteed for a max.
Basic unit with config. with e.g. two 130W CPUs with 450W PSUs.
4x 2,5" HDD + ODD Bay
S26361-K1455-V101 In this case SysArch will generate a warning and
Basic unit with PowerSafeguard will throttle CPUs and memory
8x 2,5" HDD bays, no ODD bay
S26361-K1455-V201
in case of a PSU failure.
So, power consumption will be limited to 450W.
as soon as available
S26113-F575-E12 S26113-F574-E12 S26113-E615-E10
450W PSU module platinum 800W PSU module platinum 800W PSU module titanium
1st or 2nd PSU for redundancy
1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy
94% efficiency (platinum) 94% efficiency (platinum) 96% efficiency (titanium)
uses hot plug PSU slot uses hot plug PSU slot uses hot plug PSU slot
min. 1 / max. 2x per system min. 1 / max. 2x per system min. 1 / max. 2x per system
For later redundancy upgrade the following kit is available:
S26113-F574-E99 * One 450W power supply module hot plug S26113-F575-L12
Power Supply Dummy
no power cable included!!!
must be ordered if 1x PSU only One 800W power supply module hot plug S26113-F574-L12
occupies one bay for no power cable included!!!
hot plug power supply
One 800W power supply module titanium S26113-F615-L10
as soon as available
max. 1x per system
no power cable included!!!
Please order appropriate power cord additionally:
Powercord for rack, 4m, grey, IEC320 C13->C14 connector
T26139-Y1968-L10
Power Cord USA / Canada, 1.8m, grey
T26139-Y1742-L10
*For order completeness only
Not shown in system architect
Version > V9.2
Be aware of import restrictions!
Loose delivery for later
integration possible for customer.
S26361-F3552-E1
TPM Module
S26361-F3552-L1
Trusted Platform Module on Motherboard TPM Module add-on kit
Use according to import restrictions
for later integration (loose delivery)
max. 1x per system
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
S26361-F1386-E120
Hot Plug Fan kit (2 double fans)
Fan upgrade kit for CPU
mandatory, if 2nd CPU or
1st CPU (115W or 130W) or
Cool-safe ATD is
configured ex factory
max. 1x per system
For later upgrade to 2nd CPU (bulk delivery) two fans are included in CPU upgrade kit
C
Fujitsu PRIMERGY Server 8 of 28

Other manuals for Fujitsu PRIMERGY RX200 S8

Related product manuals