Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
I
PRIMERGY RX200 S8 Status 30-01-2014
Section
V
Accessible drives
Setup by ServerStart is supported with following configurations:
no DVD, no CD:
remote installation only ( PXE service & DHCP server required)
built in DVD or USB DVD:
UNC Network share reachable or USB Floppy or MemoryBird connected
If installation is done locally, make sure you have
USB stick available for driver installation.
S26361-F3269-E2 S26361-F3641-E2
DVD-RW supermulti slim SATA Blu-ray Triple Writer slim SATA
1x all formats, DUAL/DL, DVD-RAM
6x BD-RW, 8x DVD, 24x CD
only W2K, W3K and Linux BD DL and all CD/DVD formats
0.5 x 5.25", black bezel 0.5 x 5.25"
max. 1x per system
max. 1x per system
S26361-F3749-E201 The adapter is also available as optional (loose) delivery
USB3.0 PCIe x1 adapter card lp with FH and LP bracket included
Sunrich U-720
S26361-F3749-L501
PCIe x1
1 port intern, 1 port extern
USB 3.0 A jacks
max. 1x per system
Configurations of DVD Drive
are only possible for the
Base Unit S26361-K1455-V101
(4x 2.5" HDD + DVD Option)
With onboard SATA/SAS controller,
max. 4x SATA/SAS HD`s
and one DVD are configurable.
J
USB 3.0 adapter
Fujitsu PRIMERGY Server 17 of 28

Fujitsu PRIMERGY RX200 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX200 S8
Category	Server
Language	English