Fujitsu PRIMERGY RX200 S8 - Page 18

System configurator and order-information guide
J
PRIMERGY RX200 S8 Status 30-01-2014
Section
VI
Drive Bay for Upgrade from 4x2.5" to 8x2.5" HD Basic Unit
From Base Unit S26361-K1455-V101
Drive Bay with up to 4x 2.5" HDDs Drive Bay with up to 8x 2.5" HDDs
plus one bay for DVD 8 HDD Ports are connected to a RAID Ctrl.
S26361-F3317-L700
8x 2.5" HDD Upgrade Option
Upgrade to up to 8x 2.5" bays
Section
VII
Modular Raid 0/1, Raid5 for 4x / 8x 2.5" SAS or SATA HD`s. On-board Controller for 4x 2.5" SATA or SAS HD`s
On board SATA Controller with 3 Gb/s and up to 4x 2.5" SATA HDDs (no additional controller required)
For all other HDD configurations a modular RAID-controllers is required
Following optional onboard SAS RAID can be selected for 4x2.5" base unit V101
S26361-F3674-E1
SAS enabling key for onboard ports
LSI - Patsburg B
no Cache, no BBU
only for
RAID 0, 1 & 10
V101
SAS 1.0 (3Gb/s)
4 internal ports for SAS HD
PCIe x4
no PCI slot required
max. 1x per system
For 8x2.5" V201 base unit one of the following modular RAID-controllers is required (optional for 4x2.5" base unit)
Modular Raid 0/1 controller with IME support for SAS/SATA
This RAID controller supports 8 HDDs on the 4 + 4 internal SAS ports
Modular Raid 5 controller for SAS/SATA
RAID levels 0, 1, 10, 5, 50, 6 and 60
The FBU is an option for the controller
are supported.
which can be used once per controller.
This RAID controller supports 8 HDDs on the
If the FBU option has been choosen, the
4 + 4 internal SAS ports
TFM Module is needed once per FBU.
S26361-F3554-E8 S26361-F3554-E512 S26361-F3669-E4
only Gen2 for RX200 S8
RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal
only for
Based on chip LSISAS2008 Based on chip LSISAS2108 Based on chip LSISAS2208
V101
LSI MegaRAID
LSI MegaRAID
LSI MegaRAID
no Cache, no BBU 512MB Cache with ECC 1GB Cache with ECC
RAID 0, 1 & 10
RAID 0, 1, 10, 5, 50, 6, 60
RAID 0, 1, 10, 5, 50, 6, 60
Support for 3Gb/s and 6Gb/s
optional BBU optional FBU
SATA and SAS hard drives Support for 3Gb/s and 6Gb/s Support for 3Gb/s and 6Gb/s
PCIe x8 SATA and SAS hard drives SATA and SAS hard drives
Low-profile MD2 form factor PCIe x8 PCIe 3.0 x8
max. 1x per system
Low-profile MD2 form factor Low-profile MD2 form factor
max. 1x per system
max. 1x per system
S26361-F3257-E216 S26361-F3669-E660
Cache Battery Backup Unit RAID Advanced Software Options
max. 1x per Controller License Activation Key
for CacheCade 2.0 and FastPath
for 1 Controller
Lose delivery options
S26361-F3669-E100
S26361-F3669-L660 S26361-F3669-L100
TFM Module for FBU option
RAID Advanced Software Options TFM Module for FBU option
(flash and FBU control logic)
License Activation Key
max. 1x per Controller
for CacheCade 2.0 and FastPath
max. 1x per Controller
for 1 RAID Ctrl S26361-F3669-xx
S26361-F3669-E125
S26361-F3669-L110
Flash Backup Unit
Flash Backup Unit
with 17cm cable set
with 17cm, 47cm, 62cm cable set
max. 1x per Controller
max. 1x per Controller
BBU / FBU max. 1x per system possible
K
to Base Unit S26361-K1455-V201
Fujitsu PRIMERGY Server 18 of 28