RX2520 M1
Operating Manual 73
Starting up and operation
LAN indicators
Figure 13: Indicators on the connection panel: LAN indicators
I Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D3169 BIOS Setup Utility for FUJITSU Server
PRIMERGY RX2520 M1 Reference Manual".
1LAN
link/transfer
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
2 LAN speed Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
To Next Page
Loading...
