EasyManua.ls Logo

Fujitsu PRIMERGY RX300 S8

Fujitsu PRIMERGY RX300 S8
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System configurator and order-information guide
PRIMERGY RX300 S8 Status 2017-02-28
N
Section
VIII
Raid Controller and Devices for SAS3.0 (12 Gb/sec)
Modular Raid 5 controller for SAS 12GB/s
RAID levels 0, 1, 10, 5, 50, 6 and 60
The FBU is an option for the controller
are supported.
which can be used once per controller.
This RAID controller supports max.
If the FBU option has been choosen, the
8 HDDs or SSDs
TFM Module is needed once per FBU.
A 12GB/s SAS expander is not available!
Note: This option is possible for:
Config 10: 4x SAS2.0 + 8x SAS3.0 S26361-F1373-E572
Config 12: 3.5" drive + 8x SAS3.0 S26361-F1373-E550
Config 15: LTO + 8x SAS3.0 S26361-F1373-E560
S26361-F5243-E1
S26361-F5243-E2*
Controller supports OOB-RAID including OOB-HDD monitoring
PRAID EP400i
PRAID EP420i
no OOB-HDD cable needed
Based on chip LSISAS3108
Based on chip LSISAS3108
1GB Cache 2GB Cache
RAID 0, 1, 1E, 10, 5, 50, 6, 60
RAID 0, 1, 1E, 10, 5, 50, 6, 60
optional FBU, TFM optional FBU, TFM
8 ports 3, 6 & 12Gb/s
8 ports 3, 6 & 12Gb/s
SAS/SATA HDD/ SSD SAS/SATA HDD/ SSD
PRAID EP420i for SafeStore
requires 1x FH PCIe 3.0 x8 requires 1x FH PCIe 3.0 x8
supports HDD Encryption
Low / High profile ex factory Low / High profile ex factory
available on special release
max. 1x per system max. 1x per system
Loose delivery TFM option
S26361-F5243-E100
for EP400i
S26361-F5243-E200
for EP420i
S26361-F5243-L100 / L200
1x
TFM Module for FBU option
TFM Module for FBU option
TFM Module for FBU option
(flash and FBU control logic) (flash and FBU control logic) (flash and FBU control logic)
max. 1x per Controller max. 1x per Controller max. 1x per Controller
S26361-F5243-E125
The FBU is an option
S26361-F5243-L110
Flash Backup Unit
which can be used once per controller.
Flash Backup Unit
with 25cm cable set
If the FBU option has been choosen, the
with 25cm, 55cm, 70cm cable set
max. 1x per Controller
TFM Module is needed once per FBU.
max. 1x per Controller
Advanced Software Option
S26361-F5243-E660
RAID Advanced Software
S26361-F5243-L660
RAID Advanced Software Options
free of charge test licence
RAID Advanced Software Options
License Activation Key
avaliable: PRIMERGY-PM
License Activation Key
for CacheCade 2.0 and FastPath for CacheCade 2.0 and FastPath
for 1 Controller
for 1 Controller
O
loose delivery: S26361-F5243-L1 / L2
*S26361-F5243-E4/L4**
**SafeStore (SED)
RAID controller require
HDD or SSD devices
with SafeStore (SED)
functionality
Fujitsu PRIMERGY Server 24 of 31

Other manuals for Fujitsu PRIMERGY RX300 S8

Related product manuals