Fujitsu PRIMERGY RX300 S8

System configurator and order-information guide
PRIMERGY RX300 S8 Status 2017-02-28
R
G) Fibre Channel over Ethernet
as soon as available
S26361-F5536-E202 S26361-F5250-E201
10GBit/s NIC 10GBit/s CNA
The controller is delivered without SFP+
Emulex Emulex modules for optical cables, these must be
OCe14102 NIC OCe14102 CNA ordered separately. Without SFP+ modules
2 channel 10GBit/sec NIC 2 channel 10GBit/sec CNA copper twinax cables are supported.
SFP+ Cage SFP+ Cage
PCIe x8, 170mm PCIe x8, 170mm
max. 4 per system max. 4 per system
Controllers are also available as loose delivery
OCe14102 NIC S26316-F5536-L502
S26361-F5250-E110
V:TWX Connector-PY OCe14102 CNA S26361-F5250-L501
SFP+ Module MMF 10GbE LC for all Twinax (FTS,BR,CI) contains FH and LP bracket
SFP+ module for 10 Gbit max. 2x per adapter
4x Ethernet FO cabling
ext:LC-connector
max. 2x per adapter SFP+ modules are also available as loose delivery
for OCe14102 S26361-F5250-L110
S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *)
*) in SA only
SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable shown in
customized twinax cable for customized twinax cable for customized twinax cable for cabling view
full rack setup ex factory full rack setup ex factory full rack setup ex factory
cable length is selected by
cable length is selected by
cable length is selected by
requirement in the factory requirement in the factory requirement in the factory
Fujitsu branded cable
Brocade branded cable Cisco branded cable
max. 2x per controller
max. 2x per controller
max. 2x per controller
separate orderable 10Gb Ethernet cables
S26361-F3989-L102 SFP+ active Twinax Cable Fujitsu 2m
S26361-F3989-L105 SFP+ active Twinax Cable Fujitsu 5m
S26361-F3989-L110 SFP+ active Twinax Cable Fujitsu 10m
S26361-F3873-L501 SFP+ active Twinax Cable Brocade 1m
S26361-F3873-L503 SFP+ active Twinax Cable Brocade 3m
S26361-F3873-L505 SFP+ active Twinax Cable Brocade 5m
S26361-F4571-L101 SFP+ passive Twinax Cable Cisco 1m
S26361-F4571-L103 SFP+ passive Twinax Cable Cisco 3m
S26361-F4571-L105 SFP+ passive Twinax Cable Cisco 5m
S26361-F4571-L107 SFP+ active Twinax Cable Cisco 7m
S26361-F4571-L110
SFP+ active Twinax Cable Cisco 10m
H) InfiniBand HCA's
S26361-F4475-E122/E222 S26361-F4475-E103/E203 S26361-F4533-E102/E202
PIB EP QLE7340e/42e IB HCA 40Gb IB HCA 56Gb 1 and 2 port FDR
Intel IB HCA 1x / 2x 40Gb
1 and 2 port QDR enhanced
IB HCA 1x / 2x 56Gb
PCIe 2.0 (5,0GT/s)
IB HCA 1x / 2x 40Gb
PCIe 3.0 (8,0GT/s)
PCIe x8, low profile
PCIe 3.0 (8,0GT/s)
PCIe x8, low profile
ext: 1x / 2x QSFP-connector PCIe x8, low profile ext: 1x / 2x QSFP-connector
max. 2x per system
ext: 1x / 2x QSFP-connector
max. 2x per system
max. 2x per system
2x
only within a rack
configuration
S26361-F3996-E203 S26361-F3996-E210 S26361-F3996-E556
Intel IB Cu Cable 40Gb Intel IB FO Cable 40Gb
InfiniBand Cu Cable 56Gb
customized
QSFP, 3m
QSFP, 10m QSFP, 1m and 3m
max. 2x per adapter max. 2x per adapter max. 2x per adapter
loose delivery: S26361-F4475-L122/L222
For the US market only:
loose delivery: S26361-F4475-L103/L203
Due to EMI restrictions, only one IB FDR HCA
loose delivery: S26361-F4533-L102/L202 might be installed per system
Loose delivery with
FH and LP bracket included
Copper cable are also available for loose If additional length of copper cable or optical cable are needed,
delivery as then they must be ordered from the cable vendor directly
S26361-F3996-L203, QSFP, 40Gb, 3m Copper cable are also available for loose delivery as
S26361-F3996-L210, QSFP, 40Gb, 10m S26361-F3996-L561, QSFP, 56Gb, 1m
S26361-F3996-L563, QSFP, 56Gb, 3m
S
Fujitsu PRIMERGY Server 27 of 31