Fujitsu PRIMERGY TX2550 M4 User Manual

64 Operating Manual TX2550 M4
Starting up and operation
iRMC-related status signals
6
AC
connected
indicator
green on
– The server is switched off and
connected to the mains (standby
mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
specified time.
I After connecting the server to
the mains, it will take about 60
seconds until the server will
enter standby mode and can be
switched on.
off
– The server is switched off and not
connected to the mains.
– The server is switched on and
operating normally.
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
blue flashing orange flashing
An emergency flash of the iRMC firmware
is in progress.
I For further information on the
emergency flash of the iRMC
firmware, refer to the "FUJITSU
Server PRIMERGY TX2550 M4
Upgrade and Maintenance
Manual".
Pos. Label Indicator Status Description

Fujitsu PRIMERGY TX2550 M4 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX2550 M4
Category	Server
Language	English