Fujitsu PRIMERGY TX300 S7 - Page 25

System configurator and order-information guide
M1 M2
PRIMERGY TX300 S7 / RX350 S7 Status 2014-01-30
S26361-F2826-E325
see Conf. diagram Option E
SFF (2.5") HDD-Box for additional
8x SFF (2.5") SAS hard disks
Occupies 2.5" HDD extension area
24x SAS Expander
for loose delivery please order
max. 1x per system
S26361-F3668-L1
S26361-F3673-E1 S26361-F3668-E1
Adapter Kit second RAID Controller
24x SAS Expander
required if 2 RAID controllers required for HDDs within
are necessary
Adapter Kit second RAID Controller
accessible drives area
for loose delivery please order Raid Controller required
max. 1x per system
S26361-F3673-L1
max. 1x per system
as soon as available
S26361-F3554-E512 S26361-F3669-E1
RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2108 Based on chip LSISAS2208
LSI MegaRAID
LSI MegaRAID
512MB Cache with ECC 1GB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60 RAID 0, 1, 10, 5, 50, 6, 60
optional BBU optional BBU or FBU
Support for 3Gb/s and 6Gb/s Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives SATA and SAS hard drives
PCIe x8 PCIe x8
Low-profile MD2 form factor Low-profile MD2 form factor
max. 1x per system
max. 1x per system
S26361-F3669-E100
TFM Module for FBU option
max. 1x per Controller
S26361-F3257-E270 S26361-F3669-E170
Cache Battery Backup Unit Flash Backup Unit
with 70cm cable set with 70cm cable set
max. 1x per Controller max. 1x per Controller
S26361-F3668-E1
24x SAS Expander
required for HDDs within
accessible drives area
max. 1x per system
S26361-F2826-E425
see Conf. diagram Option F
SFF (2.5") HDD-Box for additional
8x SFF (2.5") SAS hard disks
Occupies 2x 1.6" bays
in the accessible bay area
3.2 * 5.25", satin black bezel
max. 1x per system
O
2.5" HDD's
Fujitsu PRIMERGY Server 25 of 36