EasyManua.ls Logo

Fujitsu ScanPartner SP25

Fujitsu ScanPartner  SP25
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
42
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Paper Size
The following paper sizes can be scanned:
*1: Depending on the application or scan settings (e.g. paper size), there
may be insufficient memory to perform scanning.
To scan documents longer than 863 mm (34 in.), set the resolution to
200 dpi or lower.
Conditions
Paper type
The following paper types are recommended:
z Wood-free paper
z Wood-containing paper
z PPC paper (recycled)
z Plastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper weight (thickness)
The following paper weights can be used:
z 41 to 209 g/m
2
(11 to 56 lb)
z 127 to 209 g/m
2
(34 to 56 lb) for A8 size
z 1.4 mm or less for plastic cards
2.3 Documents for Scanning
ADF Maximum: A4 portrait (210 × 297 mm/8.3 × 11.7 in.),
legal (8.5 × 14 in.), long page (*1) (216 × 863 mm/8.5
× 34 in., 210 × 3048 mm/8.3 × 120 in.)
Minimum: A8 (52 × 74 mm/2 × 2.9 in.)
Flatbed Maximum: 216 × 297 mm/8.5 × 11.7 in.

Table of Contents

Related product manuals