Fujitsu ScanPartner SP25

Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 6 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
6.1 Consumables and Replacement Cycles.....................................................................................................81
6.2 Replacing the Brake Roller.........................................................................................................................82
6.3 Replacing the Pick Roller ...........................................................................................................................84
The glasses inside the ADF become very hot when
the scanner is being used.
Before you replace the consumables, make sure to
turn off the power, unplug the power cable and wait
at least 15 minutes for the ADF glass to cool down.