To Next PageTo Next PageWhat to do if Fujitsu ScanPartner SP25 has a paper jam?
If your Fujitsu Scanner experiences a paper jam, remove the jammed document. Also, verify that the document meets the requirements for scanning via the ADF.
What to do if Fujitsu ScanPartner SP30F shows a transport lock error?
If your Fujitsu ScanPartner SP30F displays a transport lock error, unlock the transport lock switch.
General| Maximum Paper Size | A4 |
|---|---|
| Scanning Speed (A4, B/W) | 25 ppm |
| Interface | USB 2.0 |
| ADF Capacity | 50 sheets |
| Duplex Scanning | Yes |
| Color Depth | 24-bit |
| Scanning Speed (A4, color, 300 dpi) | 25 ppm |
| Scanning Method | Contact Image Sensor (CIS) |
| Optical Resolution | 600 dpi |
| Scanning Speed | 25 ppm |
| Supported OS | Windows, Mac OS |
| Maximum Resolution | 1200 dpi |
| Maximum Document Size | A4 |
Explains critical safety precautions and warning symbols used in the manual.
Details the primary capabilities and benefits of the scanner's design.
Identifies and describes the various physical components of the scanner.
Provides instructions on how to power the scanner on and off.
Outlines the fundamental steps involved in performing a scan operation.
Step-by-step guide for loading documents into the Automatic Document Feeder (ADF).
Procedure for loading documents onto the flatbed scanner for the SP30F model.
Detailed steps for cleaning the ADF, rollers, and glass.
Step-by-step guide for removing and installing the brake roller.
Detailed instructions for removing and installing the pick roller.
Procedure for safely removing jammed documents from the scanner.
Explains temporary and device errors indicated by the operator panel.
Guides users through common scanning problems and their solutions.
Instructions for launching and accessing the scanner's software configuration tool.
Configure methods and areas for detecting document multifeeds.
