CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.1 Turning the scanner ON(2)
1
2
Power Save Mode
The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.
If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power
Save mode.
In the Power Save mode, the indication of the Function Number display on the operator panel goes out, but
the green LED stays lit. To return from the Power Save mode, perform one of the following:
1. Load the document on the ADF paper chute.
2. Press any button on the operator panel.
The scanner will be turned OFF when pressing down the power button for at least two seconds.
3. Execute a command from the scanner driver.
1
2
CONTENTS
To Next Page
Loading...
Need help?
General