CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.2 Loading Documents on the ADF for Scanning(5)
1
2 3 4
5
6
HINT
The stacker prevents document sheets from dropping after they are scanned.
Use the stacker as follows:
1. Lift up the stacker towards you by inserting your fingertips into the handle
on the scanner.
Handle
2. Lift the paper stop and swing forward by inserting your fingertips into the
indentations on the scanner as shown in below figure.
Indentation
5. Start up the scanner application, and scan the document.
For details on how to scan documents using the ScandAll 21 application, refer to "
2.3 Scanning
Documents"
1
2 3 4
5
6
CONTENTS
To Next Page
Loading...
Need help?
General